5 Tell-Tale Signs That You Applied Your Stickers and Labels Perfectly

Applying stickers and labels to surfaces can be tricky, but with a few tips and tricks, you can make sure they are applied perfectly every time. Whether you’re decorating your laptop or labelling important documents, having a perfect application is essential. To help you get it right every time, here are five tell-tale signs that your custom sticker application was successful: evenly spaced edges; no air bubbles; no wrinkles; adhesive fully adhered to the surface; and crisp colours. Read on to learn more about these indicators of success, as well as some helpful tips for getting your stickers and labels just right!

1. The labels are completely straight

Applying labels perfectly can make a huge difference in the end result. When you have straight labels, it ensures that your message is clear and readable. Plus, they look cleaner and more professional. It may take extra time to make sure all the edges are straight, but when it comes to high-quality, perfect results, it’s worth it.

2. There are no bubbles or wrinkles in the stickers

When applying custom-printed labels, you don’t want any unsightly bubbles or wrinkling. If your label isn’t flat against the surface you’re applying it to, it can look messy and unprofessional. To prevent this, make sure you press the label down firmly on the surface, and if necessary, use a squeegee to get rid of any bubbles or wrinkles by pushing them outwards.

3. The adhesive has bonded with the surface

You want your labels to stay in place as long as possible, so it’s important that the adhesive is properly bonding with the application surface. If you’re unsure if the adhesive has bonded, you can do a quick test by gently running your finger along the edges of the label. If it feels securely attached, you’re good to go!

4. Your labels do not curl

If you’ve applied your labels correctly, they should remain flat and level on the surface. If you start to see them curling, it could be a sign that the adhesive isn’t bonding as strongly as it should or that the material is not suited for the environment it is used in. To prevent this, make sure you clean and dry the application surface before applying the label and find the ideal material for your stickers and labels.

5. The laminate is not lifting

If your labels have a protective laminate layer, you want to make sure it’s staying securely in place. If the laminate is lifting, it means the adhesive isn’t bonding as well as it should be, which can leave your labels vulnerable to water and UV damage. To get the best results, always use a quality laminate with strong adhesion properties.

By following these five tell-tale signs of a successful sticker and label application, you can get the perfect results every time. Whether you’re decorating your laptop or labelling your products, taking the extra time to ensure everything is applied perfectly will really pay off in the end! Good luck!